| Adhesives & Equipment |
| Featured below are just a few of our most popular products. If you need more detailed information about any of these companies or their products, please contact DHA. |
|
|||||||||||
 |
Apollo Cyanoacrylates These one component, solvent-free, fast-setting adhesives are comprised of multiple ester bases. Many different formulas within these chemistries provide special bonding characteristics for plastic, metal and rubber substrates. Cyberbond's innovative "Neomer Technology" was specially developed to neutralize surface acidity and enlarge surface tension — increasing curing speeds and creating stronger bonds on highly acidic substrates. We also offer low-odor and low-blooming adhesives. |
||||||||||
| Apollo Assembly Aids Our Blast accelerators, pre-applied or post-applied during assembly, are used to increase cure rates and gap filling capabilities. Boost primers are used as a pre-applied surface treatment to increase bond strengths on difficult to bond substrates. Our popular Undo adhesive remover is designed to allow quick and effective removal of cyanoacrylates from unwanted areas. |
 |
||||||||||
 |
Titan Anaerobics
|
||||||||||
| Cybercryl Acrylics Cybercryl acrylic adhesives are methyl-methacrylate based and designed for the structural bonding of engineered thermoplastics, thermosets, nylons, composites, e-coat and metals in any combination. Ideal for applications which require high tensile and peel strength, Cybercryl adhesives also exhibit excellent chemical resistance and unsurpassed shock and impact resistance. |
 |
||||||||||
 |
Cyberpoxy Epoxies Cyberpoxy epoxy adhesives are excellent industrial adhesives characterized by a non-critical, 1:1 mixing ratio. These products will readily bond most plastics, metals, ceramics, wood and some rubbers and are ideally suited for applications in electronics and general product assembly. |
||||||||||
| UV Curables Photobond and Katiobond - acrylic and epoxy based UV curable adhesives - are designed to adhere to a wide range of substrates in demanding applicaions. Formulated for bonding, coating and encapsulating properties, these adhesives are ideal for applications which require resistance to thermal cycling under vibration, shock stresses or environmental exposure. |
 |
||||||||||
|
|
|
|||||||||
 |
||
 |
Needles Jensen Global provides the most extensive needle selection available. All disposable needles use a threaded hub design made of polypropylene and are bonded using UV adhesive for strength. Needles are color coded based on the international standard. Also available are Stainless Steel, Tapered, Teflon and Oval needles, which offer excellent compatibility with many adhesives that are difficult to dispense. |
|
| Syringes Syringes are either air operated or manual, can be calibrated or non-calibrated, and come in sizes from 01cc to 50cc. Also available are syringe adapters, tip caps and end caps. Options include fully assembled syringes, luer lock, luer slip, or tapered tip and come pre-packaged or in bulk. If capacity is too large for syringes, cartridges are available from 2.5oz to 12oz. Static mixers connect to the end of dual syringes or cartridges and mix two-component materials. |
 |
|
 |
Bottles A variety of squeeze bottles are offered from 1/2oz through 8oz. Bottles have a uniquely designed luer lock cap, which accept standard luer lock dispensing needles. Boston Round bottles have a rounded neck and Cylinder bottles have a squared off neck. Bellows bottles are accordian shaped. Luer lock caps are designed specifically for Jensen Global needles and fit all other manufacturers' needles. |
|
| JGD500S New Digital Shot Meter Brand new from Jensen Global, this digital shot meter has 10 program memory storage and a timer range from 0.008 to 99.99 seconds. In manual INT mode, the timer counts up, giving you the ability to determine the timing required with your application. Also included is sequential dispensing; ie: whatever programs are stored, the sequential dispensing cycles through each program. |
 |
|
 |
JGD7000 CA Diaphragm Valve This cyanoacrylate adhesive dispenser is designed to accept a 1-lb bottle (500 grams) of instant adhesives. There is no pouring needed (you drop your 1 pound bottle of glue right into the dip-tube tank). Very little clean up is involved with this system and you do not smell the strong fumes of the glue as this is a contained system. The valve is designed to dispense thin, medium and some flowable gel cyanoacrylates with precise deposits of glue, without dripping. The system has many ways to control the deposit: needle size, tank pressure, timer length control, and valve fine stroke adjustment. |
|
| JGD300S Economical Analog Jensen Global announces the latest addition to their line of dispensing equipment. The JGD300S is an economical dispenser that still gives the operator time control to reproduce an amount of material. The timer ranges from 00.01 to approximately 30 seconds, with a vacuum pull back feature included. You can bypass the timer by dispensing in manual mode. The JGD300S has the same sleek, lightweight design as our digital JGD500S dispenser. This takes up very little workbench space without giving up any critical dispensing features. |
 |
|
|
|
|
 |
||
 |
Hot Melt Bostik offers a wide variety of hot melt adhesives to bond wood, metal, glass and hard-to-bond plastics and vinyl. This includes polyamides, polyesters, and EVA co-polymers. These hot melts are available in all popular forms: sticks, cartridges, pellets, slat, & granular. They are fast, non-toxic and non-flammable. |
|
| Glue Guns Our expanded line of Bostik glue guns offers industrial users the best, most versatile hand-held applicators designed for use with adhesive sticks ranging in diameters of 7/16" to 1/2" and in lengths from 4" to 15". |
 |
|
 |
Sealants Bostik sealants are one-part advanced formulations that deliver durability and flexibility under the most demanding conditions. They provide exceptionally high quality, high strength bonds that resist the problems posed by dissimilar substrates, long-term exposure to sunlight, temperature changes, chemicals and joint movement. Bostik's line of urethanes, caulks and RTV silicones dry tac-free and can be used as an adhesive or a sealant. |
|
| Aerosol Adhesives Bostik's Super Tac aerosol adhesives offer reliable bonds for industrial maintenance, packaging and assembly applications. These bonds range from fast-grabbing temporary bonds to bonds with the strength of a conventional contact cement. |
 |
|
|
|
|
 |
||
 |
As a world leader in silicone technology, GE silicones offer a complete line-up of industrial adhesives, sealants, gels and encapsulants. Their primary uses are for bonding parts together and sealing out moisture, environmental contaminants and UV. Other important uses are for insulating against mechanical stress, vibration and the effects of thermal cycling. In addition, GE Silicones provide electrical protection and formed-in-place gasketing. GE has both high and low temperature silicones, as well as one and two-part adhesive sealants for general purpose, high performance, potting, and encapsulating applications. |
|
|
|
|
 |
||
| Pecora has been the leader in Construction sealants since 1862. Their product line includes water repellents, traffic coatings, fire stopping systems and elastomeric sealants. Their product line is so huge, please contact DHA for further information on their vast variety of construction adhesives and sealants that would meet your requirements.
One of their newest breakthroughs in sealant technology is their 890FTS, the industry's first Class 100 non-staining Field Tintable Silicone, which comes in about 50 colors — you mix right at the site. |
 |
|
|
|
|
| Home | About DHA | Products | Contact Us |
| Adhesives & Equipment | Tapes & Fabrication | Specialty Products |
| © 2006 DHA Industrial Products |
